Retene emission from residential solid fuels in China and evaluation of retene as a unique marker for soft wood combustion

Retene (1-methyl-7-isopropylphenanthrene) is often used as a marker for softwood combustion and for polycyclic aromatic hydrocarbon (PAH) source apportionment. The emission factors of retene (EF _RETs) from 11 crop residues, 27 firewood fuels, and 5 coals were measured using traditional rural Chinese stoves. Retene was measured in combustion emissions from all of the residential fuels tested and EF _RETs varied significantly among the fuels due to the differences in fuel properties and combustion conditions. EF _RETs for pine (0.34 ± 0.08 mg/kg) and larch (0.29 ± 0.22 mg/kg) were significantly higher than those of other wood types, including fir and cypress (0.081 ± 0.058 mg/kg). However, EF _RETs for crop residues varied from 0.048 ± 0.008 to 0.37 ± 0.14 mg/kg and were not significantly lower than those for softwood (0.074 ± 0.026 to 0.34 ± 0.08 mg/kg). The EF _RETs for coal were very high and ranged from 2.2 ± 1.5 (anthracite briquette) to 187 ± 113 mg/kg (raw bituminous chunk). EF _RET was positively correlated with EFs of coemitted particulate matter (EF _PM) and phenanthrene (EF _PHE) for crop residue and coal, but not for wood. In addition, the ratios of EF _PHE/EF _RET and EF _PM/EF _RET for coals were much lower than those for crop residues and wood. These data suggest that retene is not a unique PAH marker for softwood combustion and that coal combustion, in particular, should be taken into account when retene is used for PAH source apportionment.