Effects of microplastics accumulation on performance of membrane bioreactor for wastewater treatment

The effective interception of membrane leads to the accumulation of microplastics (MPs) in membrane bioreactor (MBR) process for long-term operation. However, the influence of MPs accumulation on the performance of MBR hasn't been well understood. In this study, the accumulation of polypropylene microplastics (PP-MPs) in two MBRs run for 3 yr with or without discharging sludge was simulated by operating the lab-scale MBRs for 84 days. The variations of pollutant removal, membrane fouling, composition of soluble microbial product (SMP) and extracellular polymeric substance (EPS), and microbial community of MBRs were systematically investigated. The results show that the removal efficiency of COD and NH₄⁺-N was not depressed by PP-MPs accumulation. However, the presence of PP-MPs in the range of 0.14–0.30 g/L could inhibit the growth of microorganisms, enhance the secretion of SMP and EPS, and reduce the microbial richness and diversity. In the contrary, the high concentration of PP-MPs (2.34–5.00 g/L) exhibited the opposite effects and mitigated membrane fouling, suggesting the important role of MPs concentration. It was also found that the exposure to high concentration of PP-MPs enhanced relative abundance of Clostridia, and inhibited the growth of Proteobacteria. The findings of this study provide a foresight to understand the effects of MPs accumulation on the performance of MBRs.