Data of a high temperature heat injection test

Stefan Heldt; Bo Wang; Linwei Hu; Götz Hornbruch; Klas Lüders; Ulrike Werban; Sebastian Bauer

doi:10.1016/j.dib.2021.107035

Data of a high temperature heat injection test

Stefan Heldt^*
, Bo Wang
, Linwei Hu
, Götz Hornbruch
, Klas Lüders
, Ulrike Werban
, Sebastian Bauer

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

This document compiles the data related to a high temperature heat injection test, which was carried out at an injection temperature of 74 °C in a shallow aquifer and is presented by Heldt et al. [1]. The data set contains transient measurements of temperatures at 18 wells in 10 depths and measurements of the experimental boundary conditions (injection temperature and flow rate) at a temporal resolution of up to 1 min. The spatial configuration and the technical details about where and how the data have been measured are provided. In addition, data of a multilevel multi well pumping test are shown. The presented data is useful to gain insights into the thermohydraulic processes induced by a high temperature heat injection test and can furthermore be used for the development and verification of numerical models of the presented experiment and similar applications like high temperature aquifer thermal energy storage.

Original language	English
Article number	107035
Journal	Data in Brief
Volume	36
DOIs	https://doi.org/10.1016/j.dib.2021.107035
State	Published - Jun 2021
Externally published	Yes

Keywords

Buoyancy flow
High temperature heat injection test
Long-term temperature monitoring
Multi-level pumping test

Access to Document

10.1016/j.dib.2021.107035

Cite this

@article{3d9922cb7f7c4a7b8d9d93522903b4eb,

title = "Data of a high temperature heat injection test",

abstract = "This document compiles the data related to a high temperature heat injection test, which was carried out at an injection temperature of 74 °C in a shallow aquifer and is presented by Heldt et al. [1]. The data set contains transient measurements of temperatures at 18 wells in 10 depths and measurements of the experimental boundary conditions (injection temperature and flow rate) at a temporal resolution of up to 1 min. The spatial configuration and the technical details about where and how the data have been measured are provided. In addition, data of a multilevel multi well pumping test are shown. The presented data is useful to gain insights into the thermohydraulic processes induced by a high temperature heat injection test and can furthermore be used for the development and verification of numerical models of the presented experiment and similar applications like high temperature aquifer thermal energy storage.",

keywords = "Buoyancy flow, High temperature heat injection test, Long-term temperature monitoring, Multi-level pumping test",

author = "Stefan Heldt and Bo Wang and Linwei Hu and G{\"o}tz Hornbruch and Klas L{\"u}ders and Ulrike Werban and Sebastian Bauer",

note = "Publisher Copyright: {\textcopyright} 2021 The Authors",

year = "2021",

month = jun,

doi = "10.1016/j.dib.2021.107035",

language = "英语",

volume = "36",

journal = "Data in Brief",

issn = "2352-3409",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Data of a high temperature heat injection test

AU - Heldt, Stefan

AU - Wang, Bo

AU - Hu, Linwei

AU - Hornbruch, Götz

AU - Lüders, Klas

AU - Werban, Ulrike

AU - Bauer, Sebastian

PY - 2021/6

Y1 - 2021/6

N2 - This document compiles the data related to a high temperature heat injection test, which was carried out at an injection temperature of 74 °C in a shallow aquifer and is presented by Heldt et al. [1]. The data set contains transient measurements of temperatures at 18 wells in 10 depths and measurements of the experimental boundary conditions (injection temperature and flow rate) at a temporal resolution of up to 1 min. The spatial configuration and the technical details about where and how the data have been measured are provided. In addition, data of a multilevel multi well pumping test are shown. The presented data is useful to gain insights into the thermohydraulic processes induced by a high temperature heat injection test and can furthermore be used for the development and verification of numerical models of the presented experiment and similar applications like high temperature aquifer thermal energy storage.

AB - This document compiles the data related to a high temperature heat injection test, which was carried out at an injection temperature of 74 °C in a shallow aquifer and is presented by Heldt et al. [1]. The data set contains transient measurements of temperatures at 18 wells in 10 depths and measurements of the experimental boundary conditions (injection temperature and flow rate) at a temporal resolution of up to 1 min. The spatial configuration and the technical details about where and how the data have been measured are provided. In addition, data of a multilevel multi well pumping test are shown. The presented data is useful to gain insights into the thermohydraulic processes induced by a high temperature heat injection test and can furthermore be used for the development and verification of numerical models of the presented experiment and similar applications like high temperature aquifer thermal energy storage.

KW - Buoyancy flow

KW - High temperature heat injection test

KW - Long-term temperature monitoring

KW - Multi-level pumping test

UR - https://www.scopus.com/pages/publications/85104347107

U2 - 10.1016/j.dib.2021.107035

DO - 10.1016/j.dib.2021.107035

M3 - 文章

AN - SCOPUS:85104347107

SN - 2352-3409

VL - 36

JO - Data in Brief

JF - Data in Brief

M1 - 107035

ER -

Data of a high temperature heat injection test

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this